Large High-Strength Spiral Welded Pipe Equipment

• Type: Stainless Steel Cut to Length Line
• Drive Mode: CNC
• Warranty: 3 Years
• Customized: Customized
• Application: Industrial Production
• Transport Package: Sea Transportation

Product Description

No.	Diameter(mm)	Coil Weight(t)	Coil width(mm)	Coil WT(mm)	Material	Speed(m/min)
1	Ø219-Ø720	10-20	400-1250	4-10	API-5LS X60-X80	0.6-3.6
2	Ø273-Ø1220	20	500-1550	6-12.7
3	Ø406-Ø1620	20	500-1550	5-14
4	Ø508-Ø2400	25-30	1100-2000	6-20
5	Ø610-Ø4000	30-40	750-2083	6.4-25.4

Spiral welded pipe equipment is a piece of equipment specially used to produce spiral welded pipes. It is suitable for producing large-diameter, thick-walled, high-strength spiral welded pipes. It is one of the indispensable equipment in modern industrial production. It has the advantages of high work efficiency, low energy consumption, and low production cost. It is widely used in petrochemical, Electric power, chemical industry, construction and other fields.
 

However, as the use time increases, some common problems will occur in spiral welded pipe equipment. This article will introduce these problems and propose corresponding solutions to help users make better use of spiral welded pipe equipment.
 

1. Welding is not firm

During the use of spiral welded pipe equipment, weak welding is a common problem. Faced with this problem, we can take the following measures:

(1) Adjust the welding current and voltage to a reasonable range to ensure the firmness of the welding.

(2) Use appropriate welding materials and choose appropriate welding methods to make the welding strength higher.

(3) Strengthen the maintenance and upkeep of equipment, promptly clean up smoke, dust and other debris in the equipment, keep the equipment clean, and reduce poor welding quality.

2. The device does not start normally

During the use of spiral welded pipe equipment, due to the influence of various factors, sometimes it cannot start normally. At this time, we can take the following measures:
 

(1) Check whether the power cord, junction box, motor and other components of the equipment are normal.

(2) Check various transmission components inside the equipment, such as belts, chains, bearings, etc., to make sure they are free of faults and loose.

(3) Check whether the control power supply used by the equipment meets the requirements and ensure that the voltage and frequency of the equipment are normal.

3. The equipment is too noisy

After long-term operation of spiral welded pipe equipment, the problem of excessive equipment noise may occur. At this time, we can take the following measures:

(1) Check the transmission components of the equipment to determine whether they are loose or worn, and adjust and replace problematic components.

(2) Check the lubricating oil inside the equipment to ensure the quality of the lubricating oil, and replace the lubricating oil regularly.

(3) Perform regular maintenance and upkeep on the equipment, and promptly remove debris inside the equipment to ensure smooth operation of the equipment.